 |
|
 |
 |
| ADD: E7-25# Industry |
| District,Jingqiao |
| Industry Park, |
| Muxudong Road, |
| Suzhou, China |
| Post code: 215101 |
| Tel: 0512-67688912 |
| Fax: 0512-67688902 |
| Email: sales@szkolon.com |
| Website: www.szkolon.com |
|
|
|
|
| GORE Series 300 Gasket Tape |
|
Inexpensive Seal System |
| Gore 300 series gasket tape is a higher performance to |
| be used on large diameter flanges and equipment |
| sealing gasket tape. Different from the sheet gasket, it p. |
| can be formed quickly, installs around shaft assemblies |
| and reduces expensive material scra. |
| Gore 300 series gasket tape is a large diameter gasket |
| to seal a flange Kind of ideal gasket. It consists of more |
| than 100% by the multidirectional expanded PTFE made |
| of, and good sealing performance and high performance |
| together. Than any other gasket has a higher creep resistance and sealing closer, and it also has the advantage of forming. Because not yield a result of cutting and Health and material waste, it is usually much more sense from a cost savings. Because of its current Field shaping, it eliminates the long delivery times, gaskets required inventory is reduced. |
|
|
| Key Features |
1、from more than 100% made of multidirectional expanded PTFE
2、wide temperature range: -450 ℉ ~ 600 ℉ (-268 ℃ ~ 315 ℃)
3、dimensional stability
4、1 / 16 "and 1 / 8" thick plate gasket replaced
5、resistance to chemical corrosion: pH 0-14
6、Good compliance
7、Resistance to creep and cold flow properties
8、Easy installation |
| The main advantage |
1、rapid installation
2、lower overall sealing costs
3、reduce inventory, installation costs
4、free from most of the effects of
chemical substances
5、excellent sealing reliability and
service life of more plant |
|
| Easy installation |
| Complete clear the sealing surface of glass lining the dirt, corrosion office, oil, or residual gasket material. Cut shown in Figure A method will be cut at one end gasket. Tear off the tape back inside the gasket placed flush with the flange, the incision placed bolt stuck. Flange gasket around the circle, and overlap with the notch on the belt pads, and as shown in Figure B for the second cut, allow 1 "overlap length. Cut horizontally above the part. Superposition total height about 120% original thickness. Tighten the bolts used at least three-step "approach or star-shaped tightening by tightening means 180 °, and finally to the way torque testing cycle to ensure strong and lasting seal. |
| Installation Guide |
Gasket width = width of about 75% effective seal
Thickness = 1 / 8 "for most of the flange (which can make up for up to 0.04" flange
deviation).
1 / 16 "tolerance for the sealing surface of the smaller devices (for a larger flange deviation, please contact Gore) |
|
|
 |
