 |
|
 |
 |
| ADD: E7-25# Industry |
| District,Jingqiao |
| Industry Park, |
| Muxudong Road, |
| Suzhou, China |
| Post code: 215101 |
| Tel: 0512-67688912 |
| Fax: 0512-67688902 |
| Email: sales@szkolon.com |
| Website: www.szkolon.com |
|
|
|
|
| GORE Series 600 Gasket Tape |
|
Protective effect can not be compared |
| Gore 600 series gasket tape is a form-in-place gasket for glass-lined equipment that guards premature gasket failure. Unlike PTFE envelope gasket, it won’t degrade due to chemical attack, ensuring a tight, long-lasting seal. |
| Gore 600 series gasket tape is a large diameter flange to seal an ideal gasket. Made of 100% multi-directionally expanded PTFE, the entire gasket is chemically inert. So the user won’t degrade due to chemical attack or environment and so on. It conforms to common glass- |
| lined flange imperfections, yet maintains dimensional stability to ensure the reliability |
| of the seal. |
|
| Key Features |
1、from more than 100% made of expanded PTFE to the tensile
2、gasket pure characteristics
3、wide temperature range: -450 ℉ ~ 600 ℉ (-268 ℃ ~ 315 ℃)
4、resistance to creep and cold flow properties
5、chemical resistance: PH 0-14
6、excellent compliance
7、dimensional stability
8、easy installation |
| The main advantage |
1、without most of the effects of
chemical substances
2、to minimize the possibility of a
potential leak
3、excellent reliability and longer seal
life
4、the least important to bear in the
number of bolts, gasket stress
can be maintained
5、reducing installation costs |
 |
| Easy installation |
| To flange separation, aside at least 6 "of space to install, Completely seal the surface of glass-lined dirt removal, corrosion Department, grease or residual sealing materials. Cut shown in Figure A method will be cut at one end gasket, Tear off the tape back inside the gasket placed flush with the flange, the incision placed bolt stuck. Flange gasket around the circle, and overlap with the notch on the belt pads, and as shown in Figure B for the second cut, allow 1 "overlap length. Cut horizontally above the part. Superposition total height about 120% original thickness. Tighten the bolts used at least three-step "approach or star-shaped tightening by 180 °, and finally to the way torque testing cycle in order to achieve lined recommended by the manufacturer to allow the maximum torque to ensure close and long-lasting seal. |
| Installation Guide |
Width = effective sealing gasket Broadband + 1 / 8''
Thickness = 1 / 4 "(for flange unevenness to 0.08")
3 / 8 "(for flange unevenness to 0.08" -0.120 ")
1 / 8 "spacer is used to compensate part of the compensation for the additional area of 0.04" of bias |
|
|
 |
